====== Handbag_Level 2 ====== {{ :fabricademy2017:students:anamaria.martinlopez:proyecto_final:dibujo.png?nolink&500x377 }} ===== Can not find the keys to your bag? Here you have a solution! ===== ===== ===== ===== Materials: ===== ===== ===== Before imitation Fabric for the lining Conductive thread Conductive fabric 4 textile leds Battery 2 rings Metallic button ===== Pattern: ===== In Rhinoceros we create the pattern with the desired measures, in this case they are: {{:fabricademy2017:students:anamaria.martinlopez:proyecto_final:patron-bolso.jpg?nolink&1110x510|patron-bolso.jpg}} Offset 20 mm (red color). Save as PDF (only red color) and open it with inkscape. Extensions→Generate from path→Patron voronoi. We save as DXF and open it with Rhinoceros. We focus on our pattern and cut with laser. We cut another 2 identical pieces for the lining. (without the voronoi pattern). We sew all the parts starting at the corners. ==== Files ==== [[https://drive.google.com/file/d/1HLUmijtlxPfbYGjbzDRxQdbm2FhxXReM/view?usp=sharing|https://drive.google.com/file/d/1HLUmijtlxPfbYGjbzDRxQdbm2FhxXReM/view?usp=sharing]] {{ :fabricademy2017:students:anamaria.martinlopez:proyecto_final:coser.jpg?nolink& |coser.jpg}} For the handle we cut a strip of 680×30.5 mm We fold in half and sew We put the rings and sew the bag. {{:fabricademy2017:students:anamaria.martinlopez:proyecto_final:asa.jpg?nolink&749x190|asa.jpg}} ===== Sensor ===== We cut 1 square of 150mm x 200 mm We sew the leds and create the circuit. {{ :fabricademy2017:students:anamaria.martinlopez:proyecto_final:bolso-circuito.png?nolink&934x1123 }} We sew automatic ones in the back and we have our portable sensor. {{ http://anakaze.com/wp-content/uploads/2018/03/IMG_1383-1-300x225.jpg?nolink& |img_1383-1-300x225.jpg}} {{youtube>qtMn2GxwLbU?medium}} Back [[http://wiki.textile-academy.org/fabricademy2017/students/anamaria.martinlopez/final_project|http://wiki.textile-academy.org/fabricademy2017/students/anamaria.martinlopez/final_project]]