====== Carnival Mask ======

For this assignment, I decided to do carnival mask. The first ı wanted to aim to make a bunny mask.

With fusion 360 slicer extension. First ı edited on the mesh mixer clean the inner parts of the mask.{{:fabricademy2017:students:ayseesindurmaz:skın:sc1.png?nolink&1366x768}}

Then ı edited on the slicer extension.

{{:fabricademy2017:students:ayseesindurmaz:skın:sc2.jpg?nolink&1366x768|sc2.jpg}}

Then ı cut with the laser cutter.

{{:fabricademy2017:students:ayseesindurmaz:skın:img_8061.jpg?nolink&800x600|img_8061.jpg}}

But in the and the mask was too big for to be a paper mask. I couldn't hold them together.

{{:fabricademy2017:students:ayseesindurmaz:skın:img_8062.jpg?nolink&600x450|img_8062.jpg}}

Then ı just made a Carnival mask with neopixels. I started with a sketch. Then ı took picture of my sketch and copied from Autocad.

{{:fabricademy2017:students:ayseesindurmaz:skın:img_8086.jpg?nolink&600x800|img_8086.jpg}}{{:students:ayseesindurmaz:mask_1.png?nolink&579x540}}{{:students:ayseesindurmaz:mask_2.jpg?nolink&450x232|mask_2.jpg}}

I used the same paper that used for my digital body assignment. I cut the paper with laser cutter. So I used the same setting like ı used in my fist assignment.

I really like to use 200 gr paper with laser cutter. You cannot see any burn pace in the material.

{{:fabricademy2017:students:ayseesindurmaz:skın:laser.jpg?nolink&700x463|laser.jpg}}

{{:fabricademy2017:students:ayseesindurmaz:skın:img_8101.jpg?nolink&600x800|img_8101.jpg}}

{{:fabricademy2017:students:ayseesindurmaz:skın:img_9402xx.jpg?nolink&800x600|img_9402xx.jpg}}

please watch the youtube video for how it's worked.

[[https://youtu.be/thJH9nt7vkQ|https://youtu.be/thJH9nt7vkQ]]

{{ youtube>thJH9nt7vkQ?large }}

----

====== Programing Neo Pixels ======

After soldering connections with neo pixels, ı embodied information into my ATtiny 45.

please visit this site to programmed your [[https://www.hackster.io/arjun/programming-attiny85-with-arduino-uno-afb829|ATtiny]]

Please visit this site to reached out your arduino ide code. [[https://github.com/adafruit/Adafruit_NeoPixel|https://github.com/adafruit/Adafruit_NeoPixel]]

{{:fabricademy2017:students:ayseesindurmaz:compete_code.png?nolink&897x757}}