fabricademy2017:students:brigitte.kock:week9 [Textile Academy]

Link to this comparison view

--- fabricademy2017:students:brigitte.kock:week9 [2017/12/05 12:09]
brigitte.kock
+++ fabricademy2017:students:brigitte.kock:week9 [2017/12/05 12:13]
brigitte.kock
@@ Line 22: / Line 22: @@
 ''Ideation | Coaching''
-//**Select your essential cloths online, input your bodyscan and add preferences for 3D printing|knitting|lasercutter after that you get the digital patterns. With them you can create your own essential closet.**//
+//**Select your essential cloths online, input your bodyscan and add preferences for 3D printing|knitting|lasercutter afterwards you get your digital book with 'sewing' patterns. With them you can create your own essential closet.**//
 **The feedback that stood out most to me was: So, what do the people do that cannot sew?**
@@ Line 51: / Line 51: @@
 [[https://nl.wikipedia.org/wiki/Strijkijzer|Katoen: 204°C]], which is approximately the same as is needed for the transferring process: [[http://agaprint.net/groot-formaat-printers-lfp/epson-textiel-sublimatie-printers/|200°C for 30 to 60seconds]]. And because FilaFlex has a melting temperature of 240 to 245°C, I thought it would be without problems.
-As you can see on the lower corner the material has melted a tiny bit, maybe I pressed down harder there then I did on the rest.
+As you can see on the lower corner the material has melted. Just like how at the same spot the paper sticked to the material. Maybe, I pressed down harder there then I did on the rest.
 {{ :fabricademy2017:students:brigitte.kock:img_0385.jpg |}}