Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
fabricademy2017:students:cheung:week_6_-_textile_as_scaffold [2017/11/14 14:52]
wei-ying.cheung
fabricademy2017:students:cheung:week_6_-_textile_as_scaffold [2018/02/28 18:00] (current)
wei-ying.cheung
Line 1: Line 1:
 ====== Week 7: Textile as scaffold ====== ====== Week 7: Textile as scaffold ======
  
-This week, I produced a composite using layers of material with epoxy and catalysing solution, layered over a foam mould that I designed in **Fusion 360** and milled it with the **CNC milling machine**, and then vacuumed it.+This week, I produced a composite using layers of material with epoxy and catalysing solution, layered over a foam mould that I designed in **Fusion 360** and milled it with the **CNC milling machine**, and then vacuumed it. To download the file for the mould, visit: [[https://​oscircularfashion.herokuapp.com/​project/​-L6RF-fDdOQ_1MThYQ-t|https://​oscircularfashion.herokuapp.com/​project/​-L6RF-fDdOQ_1MThYQ-t]]
  
 {{:​fabricademy2017:​students:​cheung:​final_1.jpg?​300|final_1.jpg}}{{:​fabricademy2017:​students:​cheung:​final_2.jpg?​300|final_2.jpg}} {{:​fabricademy2017:​students:​cheung:​final_1.jpg?​300|final_1.jpg}}{{:​fabricademy2017:​students:​cheung:​final_2.jpg?​300|final_2.jpg}}
Line 7: Line 7:
 First of all, I created a shape in Fusion containing curves because I was interested in how the material would respond to the curves. I created a sketch, extruded it and rounded off the edges with the fillet tool. First of all, I created a shape in Fusion containing curves because I was interested in how the material would respond to the curves. I created a sketch, extruded it and rounded off the edges with the fillet tool.
  
-{{:​fabricademy2017:​students:​cheung:​mould_in_fusion.jpg?​nolink&​500x140}}+{{:​fabricademy2017:​students:​cheung:​mould_in_fusion.jpg?​nolink&​500x140|mould_in_fusion.jpg}}
  
 In order to avoid any collisions with the drill tool, I had to ensure that the height of my model was less than 25mm, therefore I had to amend my design in Fusion and decrease its height. In order to avoid any collisions with the drill tool, I had to ensure that the height of my model was less than 25mm, therefore I had to amend my design in Fusion and decrease its height.