Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
fabricademy2017:students:cristina.olivotto:week_2 [2017/10/16 19:30]
cristina.olivotto 		fabricademy2017:students:cristina.olivotto:week_2 [2018/06/28 13:21]
cristina.olivotto
Line 10: Line 10:
 **ISSUES**: be sure to scan carefully the whole object!\\ **ISSUES**: be sure to scan carefully the whole object!\\
 **NOTES**: next time we do our bodies! Keep about 1m distance from the scanned object: blue: too far, green: good, yellow-to-red:​ too near **NOTES**: next time we do our bodies! Keep about 1m distance from the scanned object: blue: too far, green: good, yellow-to-red:​ too near
 +
 + ​**FILES:​** You can download the [[https://​drive.google.com/​open?​id=1aIvcATLNPI9IId0aZXCTY6sBl1Xv5Pjs|files]]
  
 <​html>​ <h3 style="​background-color:​violet">​ STEP 2</​h1>​ </​html>​ <​html>​ <h3 style="​background-color:​violet">​ STEP 2</​h1>​ </​html>​
Line 22: Line 24:
  
 **SOFTWARE**:​ we used //123D Make// to slice the model. It produces files of the pieces with numbers to facilitate the assembly. However we couldn'​t export the files to laser cut and therefore in the end we use //Autodesk Fusion 360 Slicer// \\ **SOFTWARE**:​ we used //123D Make// to slice the model. It produces files of the pieces with numbers to facilitate the assembly. However we couldn'​t export the files to laser cut and therefore in the end we use //Autodesk Fusion 360 Slicer// \\
-**ISSUES**: we made 20 vertical slices and about 20 horizontal: they seem to be too many to assembly the mannequin. 10 -15  vertical and 1-3 horizontal pieces should be enough.\\+**ISSUES**: we made 20 vertical slices and about 20 horizontal: they seem to be too many to assembly the mannequin. 10 -15 vertical and 1-3 horizontal pieces should be enough.\\
 **NOTES**: check carefully the thickness of the material that you want to laser cut and leave a few millimetres of margin. Check the dimension of the object. **NOTES**: check carefully the thickness of the material that you want to laser cut and leave a few millimetres of margin. Check the dimension of the object.