Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
fabricademy2017:students:detoledomotta.naiadelara:week_9 [2017/12/06 08:38]
naiadelara.de-toledo-motta 		fabricademy2017:students:detoledomotta.naiadelara:week_9 [2017/12/06 08:39]
naiadelara.de-toledo-motta
Line 9: Line 9:
 **MATERIAL AND TECHNIQUES ** **MATERIAL AND TECHNIQUES **
  
-**1. Look for Open Source code for Lilypad mp3 with different sound output depending on input location. {{:​students:​images:​untitled.jpg?​nolink&​180x237 ​ }}**+**1. Look for Open Source code for Lilypad mp3 with different sound output depending on input location. {{:​students:​images:​untitled.jpg?​nolink&​180x237  ​|untitled.jpg}}**
  
-The code was found in an open source website for a similar experiment with conductive ink and the code was adapted to this project.{{ ​ :​students:​images:​untitled2.jpg?​nolink&​250x191}}+The code was found in an open source website for a similar experiment with conductive ink and the code was adapted to this project.{{ ​ :​students:​images:​untitled2.jpg?​nolink&​250x191|untitled2.jpg}}
  
 Afterwards the proper code was uploaded in the Lilypad board and the electrical system was build up around it. Afterwards the proper code was uploaded in the Lilypad board and the electrical system was build up around it.
Line 19: Line 19:
 After a successful try out the circuit was redesigned to fit into the glove surface. The first sketches were made on paper but afterward it had to be digitalized. After a successful try out the circuit was redesigned to fit into the glove surface. The first sketches were made on paper but afterward it had to be digitalized.
  
-**{{:​students:​images:​untitled3.jpg?​nolink&​400x231 ​ }}**+-
  
-**3. Design the circuit and gloves with Rhino already putting it into scale.{{ ​ :​students:​images:​untitled9.jpg?​nolink&​150x209}}**+- 
 + 
 +**-\\ 
 +{{:​students:​images:​untitled3.jpg?​nolink&​400x231 ​ |untitled3.jpg}}** 
 + 
 +**3. Design the circuit and gloves with Rhino already putting it into scale.{{ ​ :​students:​images:​untitled9.jpg?​nolink&​150x209|untitled9.jpg}}**
  
 This step is necessary to prepare the vectors to be cut with the laser cutter. The O//ffset// tool was often used to ensure the same 3mm thickness of the conducting path. This step is necessary to prepare the vectors to be cut with the laser cutter. The O//ffset// tool was often used to ensure the same 3mm thickness of the conducting path.
  
-**{{:​students:​images:​untitled4.jpg?​nolink&​250x280 ​ }}**+-
  
-**4. Prepare conductive textile and cut it with laser cuter {{  :​students:​images:​untitled5.jpg?​nolink&​200x220}}**+- 
 + 
 +- 
 + 
 +- 
 + 
 +**{{:​students:​images:​untitled4.jpg?​nolink&​250x280 ​ |untitled4.jpg}}** 
 + 
 +**4. Prepare conductive textile and cut it with laser cuter {{  :​students:​images:​untitled5.jpg?​nolink&​200x220|untitled5.jpg}}**
  
 In this step a special double sided adhesive paper heat activated was used to glue the conductive textile on the glove. In this step a special double sided adhesive paper heat activated was used to glue the conductive textile on the glove.
 +
 +-
 +
 +-
 +
 +-
 +
 +-
 +
 +-
 +
 +-
  
 **5. Assembly: Sewing and Soldering** **5. Assembly: Sewing and Soldering**
Line 35: Line 60:
 The final details required the conductive thread to connect the circuit of conductive textile and normal non-conductive was used to sew the glove together. The final details required the conductive thread to connect the circuit of conductive textile and normal non-conductive was used to sew the glove together.
  
-{{:​students:​images:​untitled6.jpg?​nolink&​400x315 ​ }}+{{:​students:​images:​untitled6.jpg?​nolink&​400x315  ​|untitled6.jpg}}
  
-{{:​students:​images:​untitled7.jpg?​nolink&​300x396}} {{:​students:​images:​untitled8.jpg?​nolink&​300x396}}+{{:​students:​images:​untitled7.jpg?​nolink&​300x396|untitled7.jpg}}{{:​students:​images:​untitled8.jpg?​nolink&​300x396|untitled8.jpg}}
  
 The final product of this weeks assignment is therefore a prototype of a glove that needs to be covered inside to avoid chocks and waste of battery. This glove works and fits its purpose of innovative solution with textile for care. The final product of this weeks assignment is therefore a prototype of a glove that needs to be covered inside to avoid chocks and waste of battery. This glove works and fits its purpose of innovative solution with textile for care.