fabricademy2017:students:e-textile [Textile Academy]

Link to this comparison view

--- fabricademy2017:students:e-textile [2018/07/07 13:35]
ayseesindurmaz
+++ fabricademy2017:students:e-textile [2018/07/07 14:42]
ayseesindurmaz
@@ Line 123: / Line 123: @@
 #include <ADCTouch.h>
-#define NOTE_C  262 \\ #define NOTE_D  294 \\ #define NOTE_E  330 \\ #define NOTE_F  349 \\ #define NOTE_G  392 \\  \\ int ref0, ref1, ref2, ref3, ref4;       //reference values to remove offset \\ int speakerPin = 9; //Depends on which pin is used for the speaker \\  \\ void setup() \\ { \\   // No pins to setup, pins can still be used regularly, although it will affect readings \\  \\   Serial.begin(9600); \\  \\   ref0 = ADCTouch.read(A0, 500);    //create reference values  \\   ref1 = ADCTouch.read(A1, 500); \\   ref2 = ADCTouch.read(A2, 500); \\   ref3 = ADCTouch.read(A3, 500); \\   ref4 = ADCTouch.read(A4, 500); \\    \\   pinMode(speakerPin, OUTPUT); \\ } \\  \\ void loop() \\ { \\   int thumb = ADCTouch.read(A0);    \\   int index = ADCTouch.read(A1); \\   int middle = ADCTouch.read(A2); \\   int ring = ADCTouch.read(A3); \\   int pinky = ADCTouch.read(A4);   \\  \\   thumb -= ref0;       //remove offset \\   index -= ref1;   \\   middle -= ref2;   \\   ring -= ref3;   \\   pinky -= ref4;   \\    \\   if (thumb > 50) {  \\     if (index > 60)  \\       { Serial.print("A"); //TI  (thumb and index) \\         tone(9, NOTE_C + NOTE_D); \\       }    \\     else if (middle > 60) \\       { Serial.print("B"); //TM (thumb and middle) \\         tone(9, NOTE_C + NOTE_E); \\       }           \\     else if (ring > 60) \\       { Serial.print("C"); //TR (thumb and ring) \\         tone(9, NOTE_C + NOTE_F); \\       }           \\     else if (pinky > 50) \\       { Serial.print("D"); //TP (thumb and pinky) \\         tone(9, NOTE_C + NOTE_G); \\       }           \\     else \\       {  Serial.print("T");  \\          tone(9, NOTE_C); \\       } \\   } \\   else if (index > 60){  \\     if (middle > 60) \\       { Serial.print("E"); //IM (index and middle) \\         tone(9, NOTE_D + NOTE_E); \\       }           \\     else if (ring > 60) \\       { Serial.print ("F"); //IR (index and ring) \\         tone(9, NOTE_D + NOTE_F); \\       }           \\     else if (pinky > 50) \\       { Serial.print("G"); //IP (index and pinky) \\         tone(9, NOTE_D + NOTE_G); \\       }           \\     else \\       {  Serial.print("I"); \\          tone(9, NOTE_D); \\       } \\   }
+#define NOTE_C 262 \\ #define NOTE_D 294 \\ #define NOTE_E 330 \\ #define NOTE_F 349 \\ #define NOTE_G 392 \\  \\ int ref0, ref1, ref2, ref3, ref4; //reference values to remove offset \\ int speakerPin = 9;//Depends on which pin is used for the speaker \\  \\ void setup() \\ { \\ //No pins to setup, pins can still be used regularly, although it will affect readings \\  \\ Serial.begin(9600); \\  \\ ref0 = ADCTouch.read(A0, 500);//create reference values \\ ref1 = ADCTouch.read(A1, 500); \\ ref2 = ADCTouch.read(A2, 500); \\ ref3 = ADCTouch.read(A3, 500); \\ ref4 = ADCTouch.read(A4, 500); \\  \\ pinMode(speakerPin, OUTPUT); \\ } \\  \\ void loop() \\ { \\ int thumb = ADCTouch.read(A0); \\ int index = ADCTouch.read(A1); \\ int middle = ADCTouch.read(A2); \\ int ring = ADCTouch.read(A3); \\ int pinky = ADCTouch.read(A4); \\  \\ thumb -= ref0; //remove offset \\ index -= ref1; \\ middle -= ref2; \\ ring -= ref3; \\ pinky -= ref4; \\  \\ if (thumb > 50) { \\ if (index > 60) \\ { Serial.print("A");//TI (thumb and index) \\ tone(9, NOTE_C + NOTE_D); \\ } \\ else if (middle > 60) \\ { Serial.print("B"); //TM (thumb and middle) \\ tone(9, NOTE_C + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print("C");//TR (thumb and ring) \\ tone(9, NOTE_C + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("D"); //TP (thumb and pinky) \\ tone(9, NOTE_C + NOTE_G); \\ } \\ else \\ { Serial.print("T"); \\ tone(9, NOTE_C); \\ } \\ } \\ else if (index > 60){ \\ if (middle > 60) \\ { Serial.print("E");//IM (index and middle) \\ tone(9, NOTE_D + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print ("F"); //IR (index and ring) \\ tone(9, NOTE_D + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("G");//IP (index and pinky) \\ tone(9, NOTE_D + NOTE_G); \\ } \\ else \\ { Serial.print("I"); \\ tone(9, NOTE_D); \\ } \\ }
-  else if (middle > 60){ \\     if (ring > 60) \\       { Serial.print("H"); //MR (middle and ring) \\         tone(9, NOTE_E + NOTE_F); \\       }           \\     else if (pinky > 50) \\       { Serial.print("J"); //MP (middle and pinky) \\         tone(9, NOTE_E + NOTE_G); \\       }           \\     else \\       {  Serial.print("M"); \\          tone(9, NOTE_E); \\       } \\   } \\    \\   else if (ring > 60){ \\     if (pinky > 50) \\       { Serial.print("K"); //RP (ring and pinky) \\         tone(9, NOTE_F + NOTE_G); \\       }           \\     else \\       {  Serial.print("R"); \\          tone(9, NOTE_F); \\       } \\   }
+<code>
+else if (middle> 60){
+if (ring> 60)
+{ Serial.print("H"); //MR (middle and ring)
+tone(9, NOTE_E + NOTE_F);
+}
+else if (pinky> 50)
+{ Serial.print("J"); //MP (middle and pinky)
+tone(9, NOTE_E + NOTE_G);
+}
+else
+{  Serial.print("M");
+tone(9, NOTE_E);
+}
+}
-  else if (pinky > 50) \\     { Serial.print("P");      \\       tone(9, NOTE_G); \\     } \\   else  \\     { Serial.print("N"); \\       noTone(9); \\     } \\     \\   delay(10);
+else if (ring> 60){
+if (pinky> 50)
+{ Serial.print("K"); //RP (ring and pinky)
+tone(9, NOTE_F + NOTE_G);
+}
+else
+{  Serial.print("R");
+tone(9, NOTE_F);
+}
+}
+</code>
+<code>
+else if (pinky> 50)
+{ Serial.print("P");
+tone(9, NOTE_G);
+}
+else
+{ Serial.print("N");
+noTone(9);
+}
+delay(10);
+</code>
 }
@@ Line 133: / Line 170: @@
 ====== Connections ======
-======   ======
+I wanted
+{{:fabricademy2017:students:ayseesindurmaz:elektroniks:img_0636.jpg?nolink&800x600|img_0636.jpg}}
+{{:fabricademy2017:students:ayseesindurmaz:elektroniks:img_0625.jpg?nolink&375x500}}{{:students:ayseesindurmaz:electronic:img_0592.jpg?nolink&375x500}}
+=====   =====
+{{ youtube>BeHa3vqd-G4&feature?large }}