Both sides previous revision Previous revision Next revision | Previous revision | ||
fabricademy2017:students:e-textile [2018/07/07 13:35] ayseesindurmaz |
fabricademy2017:students:e-textile [2018/07/07 14:42] ayseesindurmaz |
||
---|---|---|---|
Line 123: | Line 123: | ||
#include <ADCTouch.h> | #include <ADCTouch.h> | ||
- | #define NOTE_C 262 \\ #define NOTE_D 294 \\ #define NOTE_E 330 \\ #define NOTE_F 349 \\ #define NOTE_G 392 \\ \\ int ref0, ref1, ref2, ref3, ref4; //reference values to remove offset \\ int speakerPin = 9; //Depends on which pin is used for the speaker \\ \\ void setup() \\ { \\ // No pins to setup, pins can still be used regularly, although it will affect readings \\ \\ Serial.begin(9600); \\ \\ ref0 = ADCTouch.read(A0, 500); //create reference values \\ ref1 = ADCTouch.read(A1, 500); \\ ref2 = ADCTouch.read(A2, 500); \\ ref3 = ADCTouch.read(A3, 500); \\ ref4 = ADCTouch.read(A4, 500); \\ \\ pinMode(speakerPin, OUTPUT); \\ } \\ \\ void loop() \\ { \\ int thumb = ADCTouch.read(A0); \\ int index = ADCTouch.read(A1); \\ int middle = ADCTouch.read(A2); \\ int ring = ADCTouch.read(A3); \\ int pinky = ADCTouch.read(A4); \\ \\ thumb -= ref0; //remove offset \\ index -= ref1; \\ middle -= ref2; \\ ring -= ref3; \\ pinky -= ref4; \\ \\ if (thumb > 50) { \\ if (index > 60) \\ { Serial.print("A"); //TI (thumb and index) \\ tone(9, NOTE_C + NOTE_D); \\ } \\ else if (middle > 60) \\ { Serial.print("B"); //TM (thumb and middle) \\ tone(9, NOTE_C + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print("C"); //TR (thumb and ring) \\ tone(9, NOTE_C + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("D"); //TP (thumb and pinky) \\ tone(9, NOTE_C + NOTE_G); \\ } \\ else \\ { Serial.print("T"); \\ tone(9, NOTE_C); \\ } \\ } \\ else if (index > 60){ \\ if (middle > 60) \\ { Serial.print("E"); //IM (index and middle) \\ tone(9, NOTE_D + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print ("F"); //IR (index and ring) \\ tone(9, NOTE_D + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("G"); //IP (index and pinky) \\ tone(9, NOTE_D + NOTE_G); \\ } \\ else \\ { Serial.print("I"); \\ tone(9, NOTE_D); \\ } \\ } | + | #define NOTE_C 262 \\ #define NOTE_D 294 \\ #define NOTE_E 330 \\ #define NOTE_F 349 \\ #define NOTE_G 392 \\ \\ int ref0, ref1, ref2, ref3, ref4; //reference values to remove offset \\ int speakerPin = 9;//Depends on which pin is used for the speaker \\ \\ void setup() \\ { \\ //No pins to setup, pins can still be used regularly, although it will affect readings \\ \\ Serial.begin(9600); \\ \\ ref0 = ADCTouch.read(A0, 500);//create reference values \\ ref1 = ADCTouch.read(A1, 500); \\ ref2 = ADCTouch.read(A2, 500); \\ ref3 = ADCTouch.read(A3, 500); \\ ref4 = ADCTouch.read(A4, 500); \\ \\ pinMode(speakerPin, OUTPUT); \\ } \\ \\ void loop() \\ { \\ int thumb = ADCTouch.read(A0); \\ int index = ADCTouch.read(A1); \\ int middle = ADCTouch.read(A2); \\ int ring = ADCTouch.read(A3); \\ int pinky = ADCTouch.read(A4); \\ \\ thumb -= ref0; //remove offset \\ index -= ref1; \\ middle -= ref2; \\ ring -= ref3; \\ pinky -= ref4; \\ \\ if (thumb > 50) { \\ if (index > 60) \\ { Serial.print("A");//TI (thumb and index) \\ tone(9, NOTE_C + NOTE_D); \\ } \\ else if (middle > 60) \\ { Serial.print("B"); //TM (thumb and middle) \\ tone(9, NOTE_C + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print("C");//TR (thumb and ring) \\ tone(9, NOTE_C + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("D"); //TP (thumb and pinky) \\ tone(9, NOTE_C + NOTE_G); \\ } \\ else \\ { Serial.print("T"); \\ tone(9, NOTE_C); \\ } \\ } \\ else if (index > 60){ \\ if (middle > 60) \\ { Serial.print("E");//IM (index and middle) \\ tone(9, NOTE_D + NOTE_E); \\ } \\ else if (ring > 60) \\ { Serial.print ("F"); //IR (index and ring) \\ tone(9, NOTE_D + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("G");//IP (index and pinky) \\ tone(9, NOTE_D + NOTE_G); \\ } \\ else \\ { Serial.print("I"); \\ tone(9, NOTE_D); \\ } \\ } |
- | else if (middle > 60){ \\ if (ring > 60) \\ { Serial.print("H"); //MR (middle and ring) \\ tone(9, NOTE_E + NOTE_F); \\ } \\ else if (pinky > 50) \\ { Serial.print("J"); //MP (middle and pinky) \\ tone(9, NOTE_E + NOTE_G); \\ } \\ else \\ { Serial.print("M"); \\ tone(9, NOTE_E); \\ } \\ } \\ \\ else if (ring > 60){ \\ if (pinky > 50) \\ { Serial.print("K"); //RP (ring and pinky) \\ tone(9, NOTE_F + NOTE_G); \\ } \\ else \\ { Serial.print("R"); \\ tone(9, NOTE_F); \\ } \\ } | + | <code> |
+ | else if (middle> 60){ | ||
+ | if (ring> 60) | ||
+ | { Serial.print("H"); //MR (middle and ring) | ||
+ | tone(9, NOTE_E + NOTE_F); | ||
+ | } | ||
+ | else if (pinky> 50) | ||
+ | { Serial.print("J"); //MP (middle and pinky) | ||
+ | tone(9, NOTE_E + NOTE_G); | ||
+ | } | ||
+ | else | ||
+ | { Serial.print("M"); | ||
+ | tone(9, NOTE_E); | ||
+ | } | ||
+ | } | ||
- | else if (pinky > 50) \\ { Serial.print("P"); \\ tone(9, NOTE_G); \\ } \\ else \\ { Serial.print("N"); \\ noTone(9); \\ } \\ \\ delay(10); | + | else if (ring> 60){ |
+ | if (pinky> 50) | ||
+ | { Serial.print("K"); //RP (ring and pinky) | ||
+ | tone(9, NOTE_F + NOTE_G); | ||
+ | } | ||
+ | else | ||
+ | { Serial.print("R"); | ||
+ | tone(9, NOTE_F); | ||
+ | } | ||
+ | } | ||
+ | </code> | ||
+ | |||
+ | <code> | ||
+ | else if (pinky> 50) | ||
+ | { Serial.print("P"); | ||
+ | tone(9, NOTE_G); | ||
+ | } | ||
+ | else | ||
+ | { Serial.print("N"); | ||
+ | noTone(9); | ||
+ | } | ||
+ | |||
+ | delay(10); | ||
+ | </code> | ||
} | } | ||
Line 133: | Line 170: | ||
====== Connections ====== | ====== Connections ====== | ||
- | ====== ====== | + | I wanted |
+ | |||
+ | {{:fabricademy2017:students:ayseesindurmaz:elektroniks:img_0636.jpg?nolink&800x600|img_0636.jpg}} | ||
+ | |||
+ | {{:fabricademy2017:students:ayseesindurmaz:elektroniks:img_0625.jpg?nolink&375x500|img_0625.jpg}}{{:students:ayseesindurmaz:electronic:img_0592.jpg?nolink&375x500|img_0592.jpg}} | ||
+ | |||
+ | ===== ===== | ||
+ | |||
+ | {{ youtube>BeHa3vqd-G4?large }} | ||