Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
fabricademy2017:students:nuria.robles:textile_domo [2018/04/24 01:08]
nuriafablab_gmail.com
fabricademy2017:students:nuria.robles:textile_domo [2018/04/24 01:10]
nuriafablab_gmail.com
Line 41: Line 41:
 Here is a video of the mounting: Here is a video of the mounting:
  
-<iframe allowFullScreen frameborder="​0"​ height="​564"​ mozallowfullscreen src="​https://​player.vimeo.com/​video/​266224954"​ webkitAllowFullScreen width="​640"></​iframe>​+<​html> ​<iframe allowFullScreen frameborder="​0"​ height="​564"​ mozallowfullscreen src="​https://​player.vimeo.com/​video/​266224954"​ webkitAllowFullScreen width="​640"></​iframe> ​</​html>//​
  
-For the support of the feet. I designed (with the help of my friend Adrian) a Y-connector that I did sew to the fabric also. +//For the support of the feet. I designed (with the help of my friend Adrian) a Y-connector that I did sew to the fabric also. {{  :​fabricademy2017:​students:​nuria.robles:​final_project:​pies_3d_small.png?​direct&​799x203 ​ }}Once the feet where sewed to the fabric, I started to mount the tent, with Ana's help. For this, I started to constructed a 5 points curved start, from each 3D foot. And after this process I tensed the structure with ropes. {{  :​fabricademy2017:​students:​nuria.robles:​final_project:​montaje_barras_small.png?​direct&​801x207 ​ }}Finally I could project the processing video in the interior ​of the dome. {{  :​fabricademy2017:​students:​nuria.robles:​final_project:​final_small.png?​direct&​801x265 ​ }}===== Next steps ===== I would love to make it bigger and make the videoprojection with a hemispherical mirror. ​//
- +
-{{  :​fabricademy2017:​students:​nuria.robles:​final_project:​pies_3d_small.png?​direct&​799x203 ​ }}Once the feet where sewed to the fabric, I started to mount the tent, with Ana's help. +
- +
-For this, I started to constructed a 5 points curved start, from each 3D foot. And after this process I tensed the structure with ropes. +
- +
-{{  :​fabricademy2017:​students:​nuria.robles:​final_project:​montaje_barras_small.png?​direct&​801x207 ​ }}Finally I could project the processing video in the interior ​od the dome. +
- +
-{{  :​fabricademy2017:​students:​nuria.robles:​final_project:​final_small.png?​direct&​801x265 ​ }} +
- +
-===== Next steps ===== +
- +
-I would love to make it bigger and make the videoprojection with a hemispherical mirror.+