For this assignment, I decided to do carnival mask. The first ı wanted to aim to make a bunny mask.

With fusion 360 slicer extension. First ı edited on the mesh mixer clean the inner parts of the mask.

Then ı edited on the slicer extension.

Then ı cut with the laser cutter.

But in the and the mask was too big for to be a paper mask. I couldn't hold them together.

Then ı just made a Carnival mask with neopixels. I started with a sketch. Then ı took picture of my sketch and copied from Autocad.

I used the same paper that used for my digital body assignment. I cut the paper with laser cutter. So I used the same setting like ı used in my fist assignment.

I really like to use 200 gr paper with laser cutter. You cannot see any burn pace in the material.

please watch the youtube video for how it's worked.

https://youtu.be/thJH9nt7vkQ

---

After soldering connections with neo pixels, ı embodied information into my ATtiny 45.

Please visit this site to reached out your arduino ide code. https://github.com/adafruit/Adafruit_NeoPixel