Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
fabricademy2017:students:alexandra.roldan:week_twelve [2018/02/14 10:03]
alexandrasrg 		fabricademy2017:students:alexandra.roldan:week_twelve [2018/02/14 14:35]
alexandrasrg
Line 1: Line 1:
 ====== SKIN ELECTRONICS ====== ====== SKIN ELECTRONICS ======
  
-For this week, we started learning about the posibilities ​of geting ​electronics as part of your body.+For this week, we started learning about the possibilities ​of getting ​electronics as part of your body.
  
-The options go from art pieces and performace artefacts ​to security gadgets.+The options go from art pieces and performance artifacts ​to security gadgets.
  
 ---- ----
  
 ===== PROJECT ===== ===== PROJECT =====
 +
 +{{  :​fabricademy2017:​students:​alexandra_roldan:​week_12:​week12.png?​nolink&​600x866 ​ }}
  
 ---- ----
Line 18: Line 20:
  
 First step was soldering the pins to be able to begin the comunication process with the RFID TAGS. First step was soldering the pins to be able to begin the comunication process with the RFID TAGS.
 +
 +The pins to solder were:
 +
 +  *
 +
 +3.3 V
 +
 +  *
 +
 +SCK
 +
 +  *
 +
 +MISO
 +
 +  *
 +
 +MOSI/SCA
 +
 +  *
 +
 +SDL
 +
 +  *
 +
 +RStout_N
 +
 +  *
 +
 +IRQ
 +
 +  *
 +
 +GND
 +
 +  *
 +
 +SEL0 (Set it in OFF)
 +
 +  *
 +
 +SEL1 (Set it in ON)
  
 I had some problems there, then with help of the other students here, found out that the problem was missing jumpers on the SEL 1, one in ON and anther one on OFF I had some problems there, then with help of the other students here, found out that the problem was missing jumpers on the SEL 1, one in ON and anther one on OFF
  
-\\ + \\ Then conected it to the ARDUINO UNO
-Then conected it to the ARDUINO UNO+
  
 Adafruit has a library for this, the code for the security nail is pretty simple, The idea was that when the RFID TAG was read, it could identify the person, so for which most of the code could be earased. Adafruit has a library for this, the code for the security nail is pretty simple, The idea was that when the RFID TAG was read, it could identify the person, so for which most of the code could be earased.
Line 40: Line 83:
 ===== RFID TAG ===== ===== RFID TAG =====
  
-The RFID  TAG had to be on the nail. I decided to put it in the back so the sensor was not easily visible.+The RFID TAG had to be on the nail. I decided to put it in the back so the sensor was not easily visible.
  
 {{  :​fabricademy2017:​students:​alexandra_roldan:​week_12:​week12nail.png?​nolink&​700x869 ​ }} {{  :​fabricademy2017:​students:​alexandra_roldan:​week_12:​week12nail.png?​nolink&​700x869 ​ }}