fabricademy2017:students:brigitte.kock:week11 [Textile Academy]

Link to this comparison view

--- fabricademy2017:students:brigitte.kock:week11 [2017/12/19 12:01]
brigitte.kock
+++ fabricademy2017:students:brigitte.kock:week11 [2018/05/28 06:37]
brigitte.kock
@@ Line 34: / Line 34: @@
 {{:fabricademy2017:students:brigitte.kock:conductive3.png?300|}}
+''Process | Step by Step''
+Below are pictures I took during the process of making the mask.
+{{ :fabricademy2017:students:brigitte.kock:layer.jpg |}}
+{{ :fabricademy2017:students:brigitte.kock:layer1.jpg |}}
+{{ :fabricademy2017:students:brigitte.kock:layer2.jpg |}}
+{{ :fabricademy2017:students:brigitte.kock:layer3.jpg |}}
+{{ :fabricademy2017:students:brigitte.kock:layer4.jpg |}}
+The mixture of conductive ink turned out to be off, so once the mask dried I found out that it didn't work at all. Instead I decided to do something with a Flora connected to a button.
+{{ :fabricademy2017:students:brigitte.kock:layer5.jpg |}}
+All the electronics connected to the breadboard the system worked. Unfortunately something went wrong between the breadboard setup and soldering the same setup. I'm not too sure yet where exactly the problem lies, but the result is that the button doesn't work anymore.
+{{ :fabricademy2017:students:brigitte.kock:layer6.jpg |}}
+{{ :fabricademy2017:students:brigitte.kock:layer7.jpg |}}
+After the latex dried completely the result stayed the same, the button didn't work, the LED fortunately did work.