Programs used:

Illustrator, Rhino, Silhouette Studio

Inspiration:

Martijn van Strien

Process:

I started of with recreating already existing modules, to get the hang of their working, to ultimately design my own. This shows the improvements needed for the first design I made myself: Using the slits in the middle causes the double layer effect to be to tight, so this will be removed in the next version. Plus the connections where found to be not strong enough. So for the next version I'll make the connections in either a bigger size or create a different connection all together.

The first image shows how the connectors where intended. Like previously mentioned I made the connectors both bigger as well as a slightly different connector. In the end, when showing the modules to others, we started playing around with the other possibilities the properties could give us. Resulting in the next two pictures. Especially the last, I found much more interesting and beautiful than the actual design. And thus for the final design I went with this way of connecting.

Files:

Illustrator file Modules, download here

For 'how to connect?' Please watch the video on the homepage. Below are some stills showing the final result of the sleeve.

Printer settings:

Yellow Vilt s100/p60/cp20 | Blue Vilt s100/p60/cp20 | Green Wool s100/p70/cp20.

The power on the lasercutter machine was 90% out of 100. And the geen wool would have been better with a higher power. Plus I would not necessary recommend cutting wool, as it smells very, very bad.