This is an old revision of the document!
PLACE: Onl'Fait, Geneva
DATE: 2/11
PEOPLE: Cristina, Francesco, Giorgia, Luisa, Zoe
STEP 1
SOFTWARE: based on the scheme provided by Wemake Milano, we fabricated a piezoresistive analog sensor. The pressure sensor was built with neoprene, Velostat, conductive threads and copper conductive fabric.
ISSUES: I sewed a small piece of conductive fabric to the conductive thread to enlarge the surface where to attach the other components. However I could have simply covered the surface with several stitches to obtain a neater result. ISSUES non proprietario
NOTES: only Neoprene without PVC can be laser cut. As I was not sure about the composition of the neoprene I used, I cut it with scissors and the shape was not extremely precise.
STEP 2
cos'é e a cosa serve
STEP 3
Example 1
Example 2
Example 3
Example 4