Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
fabricademy2017:students:galvanic_skin_sensor [2018/02/13 11:31]
ayseesindurmaz 		fabricademy2017:students:galvanic_skin_sensor [2018/02/13 12:23]
ayseesindurmaz
Line 34: Line 34:
 ==== Hardwares; ==== ==== Hardwares; ====
  
-{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​img_7998x.jpg?​nolink&​687x500}}+{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​img_7998x.jpg?​nolink&​687x500|img_7998x.jpg}}
  
 Here are the link to buy; Here are the link to buy;
Line 44: Line 44:
 [[https://​store.arduino.cc/​arduino-uno-rev3|Arduino Uno ]] [[https://​store.arduino.cc/​arduino-uno-rev3|Arduino Uno ]]
  
-==== Resim ====+==== :​fabricademy2017:​students:​ayseesindurmaz:​final_project:​connector.jpg?​nolink&​455x400 ​====
  
 ==== Arduino and processing; ==== ==== Arduino and processing; ====
  
 I used [[https://​github.com/​chris-smith/​ArduinoGSR|this source]] for visualizing my GSR data. I used [[https://​github.com/​chris-smith/​ArduinoGSR|this source]] for visualizing my GSR data.
 +
 +First;
 +
 +Open Arduino;
 +
 +Use the code from following link. And run the Arduino7
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​arduino_code.png?​nolink&​540x652}}
 +
 +Then Open Processing;
 +
 +You have to upload three code;
 +
 +1.processing
 +
 +2.keyboard input
 +
 +3.serial.
 +
 +You can just drag and drop to screen the files from the following link.
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​processign_gsr.png?​nolink&​584x500}}
 +
 +Click Run; Type your serial port number "​COMX"​
 +
 +In that case; I have COM6
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​processign_start_5.jpg?​nolink&​711x400|processign_start_5.jpg}}
 +
 +Here are my results;
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​processign_start_2.jpg?​nolink&​534x300}}
 +
 +679 is the value of not using sensor
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​processign_start_3.jpg?​nolink&​711x400}}
 +
 +Values are changing with the **pressure. **These two increse has just change with the pressure.
 +
 +{{:​fabricademy2017:​students:​ayseesindurmaz:​final_project:​processign_start_4.jpg?​nolink&​889x500}}
 +
 +I kept my fingers in the same pressure; And think about all my projects that ı have to accomplished ;) These wawes increased when ı think about them.