fabricademy2017:students:julie.taris:class9-e-textiles-wearables2 [Textile Academy]

Link to this comparison view

--- fabricademy2017:students:julie.taris:class9-e-textiles-wearables2 [2018/06/25 20:26]
julie_taris
+++ fabricademy2017:students:julie.taris:class9-e-textiles-wearables2 [2018/06/25 20:39]
julie_taris
@@ Line 108: / Line 108: @@
 ==7/let it dry for 4 hours==
 the drying depends of the cure time of the silicone. For ecoflex is 4 hours.
+the excess silicone on the edges is removed to allow a better adhesion to the second part of the mold
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_8_.jpg?200x200|}}
@@ Line 123: / Line 125: @@
 ==9/pour a second silicone layer==
-apply the second silicone layer using a mould of the same thickness as the first one
+apply the second silicone layer using a mould of the same thickness as the first one. Repeat scrape from top to bottom with equal pressure.
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_27_.jpg?200x200|}}
@@ Line 132: / Line 134: @@
 ==10/hybrid sensor observations ==
+The 4 sensor are on left part of the picture
 {{:fabricademy2017:students:julie.taris:hybridsensor-soft-robotic.jpg?200x200|}}
+The sensor is released from its mold, with ecoflex we can see a really good flexibility and with pieces of leather a stretchy and strong sensor
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_29_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_31_.jpg?200x200|}}
@@ Line 139: / Line 147: @@
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_34_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_38_.jpg?200x200|}}
+Compare to the left sensor, the right sensor : the fabric is not flat into the silicone and the layer is thicker so less flexible
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_39_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-hybrid-sensor-conductive-fabric-_16_.jpg?200x200|}}
+On this one the fabric is wrinkled and the silicone layer too thick with a more important shore
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_20_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_19_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_21_.jpg?200x200|}}
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_23_.jpg?200x200|}}
+a cutting test is performed to see if it is possible to cut once the sensor is finished : but cutting fabric with metallic fibers on this thickness and silicone damages the sensor too much.
 {{:fabricademy2017:students:julie.taris:julie-taris-ewearable2-1mmaplicator_24_.jpg?200x200|}}