hybrid sensor silicone textile

I have chosen a documentation on this site, more precisely on hybrid sensor silicone textile.
https://softroboticstoolkit.com/textile-silicone-hybrid-sensor.
The idea is to apply the sensor on the elbow. The input would be the movement.
The output for the moment a led that lights up.

I try several settings cuts

I made a mold for the silicone.

glue for both surfaces

put the mixture of sillicone in vacuum bell

try to cleanly spread the siliccone without drawing in too much air.

the transparent effect is interesting

I try this documentation :

http://www.instructables.com/id/Connecting-a-textile-analog-sensor-to-Arduino/

the lilypd light flashes more or less quickly but the connectors are attached with tape and don't hold up well.

I need to find pliers to run a functional test.

to make a thinner thickness and greater flexibility.

this time with repositionable glue

and with a 3D printed mold

https://vimeo.com/245700846

https://vimeo.com/245700846

julie-taris-e-textile-wearable-sensor-applicator.pdf