This is an old revision of the document!
Stretched Textile Domo and LilyPad shield
LilyPad Shield
For connecting the accelerometer to the Pillow, I want to use conductive thread.
It's very difficult to sew the acelerometer pins to the fabric, so, I decided to make my own acelerometer shield. After designing it in Eagle to get the Lilypads' pads, I run into Rhino to design the outline
After having the pngs, I ran mods to mill the PCB in the Modela MDX-20
Once the connector is attached to the shield, the next step is to figure out where are the traces going. I did use the magic needle to switch the conductive thread and be sure to finish the part.
