Media Manager
Namespaces
Choose namespace
Media Files
Files in fabricademy2017:students:akhibi.sophie:final_project
- 19.01.2018_research_phase_.jpg
- 775×496
- 2018/01/19 10:01
- 63 KB
- arduino_esp_ble.jpg
- 591×710
- 2018/03/24 19:13
- 75.3 KB
- arduion_installing_esp.jpg
- 715×639
- 2018/03/24 19:03
- 86 KB
- block_code.png
- 1448×863
- 2018/03/24 22:19
- 294.6 KB
- coding_ardunio.png
- 2172×977
- 2018/03/24 21:46
- 396.8 KB
- draft_for_partial_conductive_material.jpg
- 174×449
- 2018/01/19 09:42
- 21.8 KB
- esp32_development_board.png
- 2292×967
- 2018/03/21 10:37
- 902.1 KB
- esp32_kit_box.jpg
- 1919×890
- 2018/03/24 23:33
- 100 KB
- esp32_kit_box_1.jpg
- 1919×890
- 2018/03/24 23:40
- 100 KB
- esp_kit_box.png
- 1132×729
- 2018/03/24 23:40
- 364.2 KB
- final_apperance.jpg
- 464×299
- 2018/03/29 21:40
- 12.1 KB
- final_ground_and_analog_side.png
- 566×519
- 2018/03/24 20:22
- 514.9 KB
- final_rhino_sketch.png
- 1148×964
- 2018/01/17 16:15
- 168.2 KB
- first_sketch.jpg
- 626×381
- 2018/01/17 15:58
- 32.1 KB
- sam_calish.jpg
- 765×518
- 2018/04/25 12:07
- 67 KB
- settings_lasercut_different_material.png
- 1674×280
- 2018/01/19 08:01
- 285.2 KB
- soldered_sole.png
- 1039×674
- 2018/03/18 14:12
- 1.5 MB
- sole_3_parts_rhino_grasshopper.png
- 1357×980
- 2018/01/17 16:11
- 198.6 KB
- sole_components.png
- 1333×590
- 2018/03/24 20:54
- 982.9 KB
- sole_conductive_material.png
- 699×822
- 2018/01/20 13:12
- 757.8 KB
- sole_correct_measurements_shoe_size_46_conductive_and_non_conductive.jpg
- 788×739
- 2018/01/19 08:44
- 57.3 KB
- sole_pads_soldered_and_with_breadboard.png
- 567×382
- 2018/03/24 20:04
- 487.5 KB
- sole_with_less_pads.png
- 960×680
- 2018/03/18 13:49
- 554.2 KB
- table_arduino_requirements.png
- 1325×502
- 2018/03/24 23:08
- 23.2 KB
- table_thunkable_requirements.png
- 1396×893
- 2018/03/24 23:16
- 35.3 KB
- thunkable.png
- 1613×685
- 2018/03/24 21:12
- 424.7 KB
![[root]](/start?ns=&tab_files=files&do=media&tab_details=view&image=fabricademy2017%3Astudents%3Ajulie.taris%3A3dprintapplicator-4faces.jpg){kind=link}
File
- Date:
- 2018/03/22 23:00
- Filename:
- 3dprintapplicator-4faces.jpg
- Format:
- JPEG
- Size:
- 225KB
- Width:
- 1920
- Height:
- 1080
- References for:
- class8-open-source-hardware