• Felt
• Textile vinyl
• Automatic
• Thread

• Cut a square of 860x690mm (blanket)
• Cut 15 squares of 150x150mm (pockets)
• Cut 4 strips of 68x220mm
• Cut 1 strip of 68x880mm
• Cut 3 circles of 36mm

1. First the small squares are prepared, sticking in each of them its QR code and the name of the corresponding tutorial.
2. To create the codes use this page online ://www.unitag.io/qrcode

1. Ironing: When you buy vinyl the manufacturer usually puts the right temperature for ironing, in my case 167º.
2. Sew each square to the blanket leaving space to differentiate project tutorials and iron the “Project Library” label.
3. In the upper left corner, sew the circles and their corresponding label.
4. Sew the 3 strips to be able to hang it distributing them along the blanket and sewing on the ends an automatic.
5. Sew the corresponding automatic part to the blanket.
6. In the middle of the blanket, sew the remaining strip to be able to roll the blanket with an automatic on its end and the other on the back until it coincides more or less towards the middle.
7. Finally sew the longest strip to be able to take it as a backpack, for it measure 10cm from the end of the blanket from left to right and sew.

Files: https://drive.google.com/file/d/1aChrUrcYVpy8ATEYUEpBy-lz4KBPG1_6/view?usp=sharing