Grasshopper
These days I have been watching Aldo's tutorials and decided to follow one of them because the truth is that I do not know much about Grasshopper and I wanted to try it after seeing the things that can be done with this tool.
Both the tutorial of Aldo and later the internet helped me to know better this plugin of Rhinoceros, but I did not get good results.
I will have to practice more.
The result was this:
Shoulder pad
I continued researching online and found several tutorials that taught me to understand Grasshopper better.
https://vimeopro.com/rhino/grasshopper-getting-started-by-david-rutten
It is a very powerful tool and has many add-ons that help create incredible models.
I decided to make a personalized shoulder pad by following this tutorial.
In Spanish:
You need:
Workflow:
I use my 3D scanning image of class 2 digital bodies.
I open the image with Rhinoceros and start working.
We adapt the point to the shoulder, for this we adjust it with slider.
Save as STL
Makerboot
We open the file with the Makerbot software and prepare to print.
We activate raf and supports.
0.2 mm layer thickness
15% infill
2 shells
Temperature: 218
Finally I'm like that!
After removing all the supports this is the final result.
