Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
fabricademy2017:students:angela.barbour:week_08._open_source_hardware_-_from_fibers_to_fabrics [2018/02/13 19:35]
angelabarbour [05. Installing Servo Motor] 		fabricademy2017:students:angela.barbour:week_08._open_source_hardware_-_from_fibers_to_fabrics [2018/02/13 19:40]
angelabarbour [06. Drawing with Joined Movements]
Line 146: Line 146:
  
  ==== 06. Drawing with Joined Movements ====  ==== 06. Drawing with Joined Movements ====
 +
 +
 +a. Test drawing in a paper, the control from the buttons and the movement of the motors.
 +
 +b. One button makes the stepmotor turns to CW direccion, while pressed.
 +
 +c. The second makes the stepmotor turns to ACW direccion, while pressed.
 +
 +d. The third button turns to 30 degrees the inclination of the pen when pressed (touching paper), and returns to 60 degres the inclination when pressed again, clearing the paper.
 +
 +e. The draw occurs by the hand movement of the board containing the paper.
 +
 +f. The movement of this board with the paper is a step to be developed later.
 +
  
 {{ :​fabricademy2017:​students:​angela.barbour:​06_installingjoimovment.jpg |}} {{ :​fabricademy2017:​students:​angela.barbour:​06_installingjoimovment.jpg |}}