I'm Ângela Barbour from ELLORA Ateliê in Sao Paulo Brazil. I’m a visual artist and researcher in digital fabrication actuating in the Fab Lab SP. I've founded in Brazil, the first communitarian, public and free Fab Lab in the country,  that was in Latin American Memorial Foundation, and also the PORTOFabLab, specially dedicated to art. 

As an artist I have a project where I assume a character called Esther, that is a woman and also her suitcase, she collects objects and histories from people around the world, and in the Performance take out these objects from the suitcase and tell their histories in an intervention made in the museum. In 2018 May I will present and Intervention and a Performance in Sofia Paper Art Festival 2018.

1. Collecting objects and histories to tell at the Performance.
2. The Research “in locu” will be made specially at the Center Of Cinema from Sofia, appart from the research that I've been maden before.
3. Decide the sound track and prepare ir in a file to be reproduced during the performance.
4. Research and prepare the costume to be used at the Performance (this is part of my final project).
5. Plan and Produce the elements of the installation.
6. Plan and produce the electronic circuits for artwork.

1. Stablish the stakeholders, people or companies that may be interested in support the project.
2. Study the possibility of donating a part of the work to the Museum, for adding value to the all work.
3. Check all the steps of the production in order to have a check list of the procedures and materials, to calculate the time , deadlines and costs.

1. Develop a system for the public interaction.
2. Collect the public feedback.
3. Document all the process for a possible catalog and portfolio.
4. Evaluate the success of the Project by the public and crytic feedback.

This element was developed in the Weekly assignment from week 03, and can be seen in the link beloww.

Week 03: Circular Open Source Fashion

In the intervention I will use the material developed for the Circular Fashion, making pieces to construct the scene of the intervention.

I 've used laser rastering to produce some images that will be used in the final presentation of the work in Sofia to compound the installation.

I used it in a special paper that has a pearl layer cover that is removed with the laser, and the image is revealed only by this slightly diference between the original paper and the areas without the pearl revestiment.

Below you can see some images produced like this and presented in another exhibition

Using discards from cotton truck air filters. The whole process can be seen on weekly assignment from week 07, and can be reached at the link below.

Week 07. The Textile Scaffold

Using discarded materials from vegetables. Process described and explained in the week 04.

Week 04. Biofabricating dyes & materials

To compose with the fabric I will use HandMade Paper dyed with Natural Dyes :

During the weekly assignment from week 06, I developed two parametric designs to be 3D printed and laser cut in the costume.

Week 06. Computational Couture

For the Costume I developed a special cloth ( a scarf and a cap) and a mask with application of very sutil lights.

In all these elements in the papers, the objects in the suitcase, in the costume and in the maskI I`ve installed LED lights to be controlled by me during the performance and by the public by IOT, so I can have a feedback in the end of the presentation.

I will insert very sutil lights in the objects in the suitcase, specially the books and letters.

After the MiDi Term presentation, and the comments of Neil about all projects, I've decided to concentrate my efforts in constructing an artwork as an Object, instead of the complete installation, because the complete installation, will be a site specific work that I will produce “In Locu” in Bulgaria, and now, for the end of the Fabricademy course, I need a complete work already finished. Another comment ou question of Neil , this time, specifically about my project, “How do you know that your project was successful? ” I answered that if I achieve all that I was proposing, it was successful, but for answering better this question, I developed the Rizhome artwork as an Object, and applied it to a very important International Exhibition, that will be also in Sofia Bulgaria, in the National Palace of Culture, to celebrate the Presidency of the European Union , that this year comes to Bulgaria. And I have already the answer, that my artwork was selected to be one of the works in this exhibition that will present 65 artists from 25 countries, and from Brazil only two were selected, mine and one more. As an artwork, the better way to evaluate a project is submitting it to a jury evaluation, if the work is selected is because it is really good and successful. So I'm using for this end project the dimensions allowed by this exhibition, that permitted me to essay very well everything I was planning. So for now on I will describe the final production of this work.

01. As the National Palace of Culture is a very important place and has their rules for hanging the works, I planned a support to hang the work, so it can be sendo with all I need, and independent of the place and condition of the space itself. This is always a problem in participating of an international exhibition, where you can't see previously the exact place your work will be, so you must think in everything, since way of fixing in the wall, the light, the assembly and the public interaction.

02. First of all I planned the work in a way that it could be very easy to:

a.) Send by mail
b.) Mounted at the Museum
c.) Fixed in the wall
e.) Carry its own planned and desired lighting 
f.) Facilitate the Public
g.) Previewing the Public interaction

03. The first part I developed was the Support, that I decided to be an eliptical form with 6mm diameter holes, to be able to pass the lines, LED lights and conductive threads nedded for the work function.

a.) I designed it in Corel Draw and send this draw to cut in Laser cut machine, first I made a model in MDF and after in the final material, mirror acrylic.
b.) I also planned a litle piece to take everything above the support, hanging the pieces sent already mounted from Brasil, because it is very difficult and a construction very complicated as a painting, so this structure pass trough the hole, and after can be fixed by a adhesive paste to the support and blocking the piece to come down during the exhibition.
c.) These pieces can be seen in the following images.
d.) After everything was laser cut, I begin mounting the work, first mounting the wall support to the base, this support has two screws to be hanged in the wall and two others to be fixed to the base in two of the holes,  with washers.
e.) When the support was already in the wall, I pinned the LED lights in the holes (I also used this adhesive mass to fasten the LEDs to the holes) and joined with the conductive threads until the battery holder to close the circuit.
e.) In the sequence I mounted all the handmade paper tying up each one with silk line glued in the paper with the paper pulp, so it seems to be part of the paper. These lines passes through the holes and tyied up to the litle pieces and fixed with the adhesive mass to the top and back of the support.
f.) In this way from the front of the artwork we can see only the lights on the top and the papers hanged and lighting.
g.) The battery holder used in the top turns on and off this LED lights all together, by the switch button on it.

I constructed the artwork inserting the handmade paper sheets one by one, studying their position and relation with the whole work. As can be seen in the sequence below, firstly the conductive lines can be seen, but after it is incorporated to the work , and works as one group more of lines that take art of the final construction.

Also after inserting almost all sheets, I begin studying a complementary light to iluminate the work , and I found that a light coming from the botton could be very intersting because it highlights the texture of the paper, and the forms inserted on it using the modular mask made in acrylic and in plotter adhesive during the processing of the paper pulp and paper make.

I liked very much of the botton light and decided to instal the public interation of the work on it, so I use the robot made on the weekly assignment from Week 08, installing a LEd lantern instead of a pen in the compass holder, hacked to move with a step motor and a Servo motor.

This construction became like this:

After disscusing with my Mentor Anastasia Pistofidou, we decided that the system should be hiden in a box , and when I constructed this box in two steps to put all the electronic control, I introduce three new elements:

01. The step motor system controlled by buttons to spin to the right (CW) and to the left (CCW). 02. This step motor supports the LED lights that substituted the lantern. 03. 3 warm white LED Lights in place of the lantern. 04. One RGB LED light. 05. I introduce two new elements: 06. A potentiometer to control the color of the RGB LED light (as I've used in the assignement of week 09. 07. A distance sensor to control the intensity of the white LED lights.

The construction of the circuit and assembly was like below.

For the final work I used all the paper elements I've been preparing with the molds and with natural dyeing, and assembled them in a way that it could be moved around and lighted with the light system I`ve developed for that. In this way I can have the public interaction and feedback.

Below the images of the final work with many possibilities of the changing light system.

The MAsk that I'll use in the Performance was developed and produced in the Week 12 assignement of Skin Electronics.

Week 12. Skin electronics

The scarf that I'll use in the Performance was produced as a result and extension of the Week 06 assignment of Computational Couture , and can be checked in Week 06. Computational Couture

The most intersting piece of the Costume was produced by the parametric design with Arabic of Alhambra Inspiration. In Fab 13 I've done a workshop of Islamic Design, and there we worked with a very simple software, the Taprats, that creates very interesting parametric designs with islamic inspiration, so I decided to use it.

In the links below you can reach the program for download and some basic coments about it usability.

https://taprats.soft112.com/

https://sourceforge.net/projects/taprats/

In the image below can be seen the several steps of the file production, first at Taprats, and after in the Ilustrator to reduce the lines thickness, and group and ungroup the forms so it can be laser cut.

With this file I tried the form laser cutting in paper and in the final fabric as below:

Finally I decided the model of the cape and transform the design into a circular one in the ilustrator for laser cut in the final cape as bellow.

Fabricademy was a great opportunity to learn new skills on technology, that I imediatly used in my personal artistic work, so it was wonderful for my carrer as an artist and also for my enterprise as I will be able to be an instructor in the Fabricademy course 2018. I would like to thank you all the Global instructors and also the friends from all over the world I have done during these exciting six months course ! Thanks Lot and see you soon !

https://drive.google.com/file/d/1PylNTJw7oM-BEHl54pwcjZJt6oxnCyXg/view?usp=sharing

https://drive.google.com/open?id=1PIAtMMlb1_Vle2BjZw1TNRwkO0Gk1F7w

https://drive.google.com/file/d/1Pelzzip5iWUYEoMFlufKXgvPfXDRdM3m/view?usp=sharing

My artwork was applyed a nd selected by the international jury, to participate of the AMATERAS Jubilee Exhibition for the Presidency of the European Union, that was this year in the National Palace of Culture in Sofia, Bulgaria, with the oppenning in the April 12th 2018. And the Cerimony of Prizes in the 18th May 2018.

https://www.facebook.com/photo.php?fbid=1683889218374706&set=pcb.1683908191706142&type=3&theater

https://www.facebook.com/sofiapaperartfest/photos/a.2073990099555930.1073741884.1580434265578185/2073990486222558/?type=3&theater

The Performance was presented at the oppenning event of the IAPMA Congress in Sofia at Paper Pulse Exhibition in the Triangle Tower of Ancient Complex of Serdika, in Sofia Bulgaria, in the may 16th 2018. All the documentation was made by the public and send to me, after I asked that who liked the performance , please send me images taken during that.

I've received many pictures and comments of many people, that talked to me after the Performance and send me the images after all. So this was the feedback from the public and proof the success of the project.

Here I show a collage of some images received.

This Final Results, correspond to the presentation of the works produced in the project, in the Exhibitions and events in Sofia Bulgaria.

It was amazing, because, the public interacted very much giving me many feddbacks about the works and the new skills I've introduced at my artistic work with Fabricademy.

Thanks lot for the Orientation, evaluation and all the process.